Digital Spa Control System From Applied Computer Controls
ACC UNI-PACK 1000 Control Kit With 5.5KW Heater
Programmable Electronic Controller With Digital Topside Keypad
Includes manufacturer's 2 year parts warranty and FREE shipping to the 48 contiguous United States.
This controller is for use with fresh water spas only. Use in salt water systems voids the warranty.
Custom salt water systems are also available. Please inquire.
ACC Spa Control Systems Are Safety Tested & Certified by ETL
For Conformance to UL & Canadian CSA Standards
Made in The U.S.A.
The UNI-PACK 1000 features a heater that can be mounted remotely or at any height when attached to the control box. 12" long power and sensor cables connect the heater to the box.
SPECIFICATIONS
Digital Topside 6-button Keypad With LED Display
System Can Be Configured By Installer For 120 or 240 Volts AC
Unit Ships With Wiring Configured For 240V Heater & 120V Pump, Blower & Ozonator
Enclosed No-Rust Aluminum Control Box With Removable Cover
Heater Flow Switch and Temperature Sensors Pre-Installed For Easier Installation
Note: Heater must be installed on the discharge (pressure) side of the pump.
2" Stainless Steel Full-Flow Heater (1.5KW @ 120V or 5.5KW @ 240V)
Heater can be mounted at any height on back of control box or it can be mounted remotely.
32" power and sensor cables connect the heater assembly to the control box.
PVC Heater Unions With Gaskets Also Included
User-Programmable Filter Cycles
Keypad Has Built-In Clock & Status Indicator Lights
Installation and Operation Instructions Included
System Rated 120/240 volts AC 60 Hz Single Phase 16/41 Amps Maximum
Operates the following equipment (not included):
Pump (max. 14A/120VAC or 12A/240VAC)
Auxiliary 2nd Pump or Air Blower (14A/120VAC or 12A/240VAC)
Ozonator (max. 1A at 120 or 240VAC)
Spa Light (max. 1A at 12VAC)
All inputs connect to the controller with 4-pin Amp plugs with the exception of the light which has a 2-pin Amp plug connection.
Power cable for pump and pigtail cords for blower, ozonator and light are included at no extra charge!
Requires a GFCI protected supply circuit.
240 volts AC 60Hz Single Phase 4-wire Circuit with 50 Amp 2-pole Circuit Breaker
or
120 volts AC 60Hz Single Phase 3-wire Circuit with 20 Amp 2-pole Circuit Breaker
Refer to a qualified licensed technician for installation.
Note: This system must be installed in a protected location such as the equipment compartment of the spa where it is not directly exposed to the weather.
DIMENSIONS
Control box: 13" wide x 11-1/2" high x 4" deep
KP1000 Keypad: 5-1/2" x 2-1/2” rectangle (56" cable)
Heater Tube: 15" long
Heater with unions attached: 17" long
Optional Larger Keypad Available
Mounts in a 6-1/2" x 2-1/2" spa shell cutout.
GOT QUESTIONS? - WE CAN HELP!
Need help selecting the right control for your spa?
Click HERE to see a detailed chart and compare all 15 of our available spa controller models.
ACC SPA CONTROL SYSTEMS ARE SAFETY TESTED & CERTIFIED
BY ETL FOR CONFORMANCE TO UL & CANADIAN CSA STANDARDS
SAFETY TIP: Don’t be misled. Some spa control manufacturers claim to use all UL, ETL and CSA components in their units but have not had their fully assembled spa controller properly tested and certified for safety. Certified components is not the same as a fully certified spa controller. When you buy, be sure to get a spa controller that has a UL, CUL or ETL safety certification.
MADE IN THE U.S.A.
|
GOT QUESTIONS? - Need help selecting the right control for your spa? We can help! Email us with your questions and get a prompt response 7 days a week. If you prefer, send us your phone number and we will give you a call.
Sign In
